Product ID:041486D DZ3 LIGHT GRAY PRIMER SURFACER
MSDS Date:06/09/1986
FSC:8010
NIIN:00F031756
MSDS Number: BSPBQ

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

10.46

RTECS: 9999999WG

ALUMINOSILICATE *93-4*

CAS: 1327-36-2

Fraction By Weight: 10%

OSHA PEL 10 MG/CUM

ACGIH TLV: 10 MG/CUM

BARIUM SULFATE, BARYTES

CAS: 7727-43-7

RTECS: CR0600000

Fraction By Weight: 5%

OSHA PEL 0.5 MG/CUM

ACGIH TLV: 0.5 MG/CUM

MAGNESIUM SILICATE

Fraction By Weight: 20%

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5-20%

OSHA PEL 10 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

BUTYL ACETATE (N-BUTYL ACETATE)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 5-10%

OSHA PEL 710 MG/CUM

ACGIH TLV: 713 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 5%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS (PROPRIETARY)

Fraction By Weight: <20%

RESIN (PROPRIETARY)

Fraction By Weight: <20%

ADDITIVES (PROPRIETARY)

Fraction By Weight: <20%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL/FATAL. EYES: SEVERE
IRRITATION. SKIN: MODERATE IRRITATION. INHALATION: VAPOR & SPRAY
MIST MAY BE HARMFUL. REPEATED EXPOSURE TO HIGH VAPOR CONCENTRATIONS
MAY CAUSE IRRITATION OF THE RESPIRATORY SYSTEM & PERMANENT BRAIN &
NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHES, NAUSEA, DIZZINESS & LOSS
OF COORDINATION. EYES: WATERING, REDNESS, ITCHING, BURNING
SENSATIONS, VISUAL DISTURBANCES. SKIN: DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, SWELLING .

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN: REMOVE PROMPTLY BY
WIPING, FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION/SUPPORTIVE MEASURES AS REQUIRED. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:72F
Lower Limits:1.4%
Extinguishing Media:CO2, DRY CHEMICAL, OR UNIVERSAL AQUEOUS FILM
FORMING FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, BUT MAY BE
USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BUILD-UP/AUTOIGNITION/EXPLOSION. WEAR SCBA. PREFER FOG NOZZLES.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BUILD-UP
PRESSURE/AUTOIGNITE/EXPLODE DUE TO EXTREME HEAT. FLAMMABLE LIQUID.

Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER RESPIRATORY/SKIN & EYE PROTECTION SHOULD BE
PERMITTED IN AREA. REMOVE ALL IGNITION SORUCES. TAKE UP
W/SAWDUST/VERMICULITE/OTHER ABSORBENT MATERIAL & PLACE INTO
CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:DON'T STORE >120F. CONTAINERS SHOULD
BE GROUNDED WHEN POURING. AVOID FREE FALL OF LIQUIDS IN EXCESS OF
FEW INCHES. AVOID LONG-TERM/REPEATED CONTACT.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ MSDS'S FOR OTHER COMPONENT OR COMPONENTS BEFORE
BLENDING AS THE RESULTING MIXTURES MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS. KEEP CONTAIN ERS TIGHTLY CLOSED.

Respiratory Protection:NIOSH/MSHA-APPROVED PAINT SPRAY OR AIR SUPPLIED
RESPIRATORS MAY REDUCE EXPOSURE. VAPOR EXHAUST OR FRESH AIR ENTRY
TO PREVENT OVEREXPOSURE TO VAPORS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTERN TO KEEP
CONCENTRATION OF INGREDIENTS BELOW EXPOSURE LIMITS.
Protective Gloves:NITRILE/NEOPRENE RUBBER
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES/FACE SHIELD
Other Protective Equipment:POLYVINYL ALCOHOL GLOVES, PROTECTIVE
CLOTHING, IMPERMEABLE APRON
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS CAN BE HARMFUL OR FATAL. % SOLID BY WEIGHT: 70.9. STORE
LARGE QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
NFPA CLASS IB FLAMMABLE LIQUIDS.

Boiling Pt:B.P. Text:172-293F
Vapor Pres:23.7
Vapor Density:>1
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:MODERATE
Percent Volatiles by Volume:42.2

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HOT SURFACES, ELECTRICAL EQUIPMENT, TEMPS
>120F, & OTHER SOURCES OF IGNITION
Hazardous Decomposition Products:CO

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED/DISPOSED OF THROUGH AN APPROVED WASTE
MANAGEMENT FACIL ITY. FLAMMABLE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.